한국생산기술연구원장상

KITECH PRESIDENT PRIZE

단일소재 기반 고효율 정온 표준물류용기

단일소재 기반 고효율 정온 표준물류용기

High-Performance Standard Thermal Container: A Mono-Material Solution

2026년

  • 업체명엔피씨 ㈜ (NPC Co., Ltd.)
  • 대표자나창엽, 양창영, 심일식 (Na Chang Yeop, Yang Chang Yeong, Sim Il Sik)
  • 주소경기도 용인시 수지구 신수로 785-17 (785-17, Sinsu-ro, Suji-gu, Yongin-si, Gyeonggi-do)
  • 전화031-5174-8800
  • 사업분야제조업, 물류기기 도매·임대업
  • 홈페이지www.npc.co.kr
  • 단일소재 기반 고효율 정온 표준물류용기
  • 단일소재 기반 고효율 정온 표준물류용기
  • 단일소재 기반 고효율 정온 표준물류용기
이전 다음
제품개요 (Product Outline)
○ 일회용 EPS 포장재를 대체하기 위한 단일 소재 기반 다회용 정온 물류 용기
-신선식품 정온 물류 확대에 따른 재사용 정온 포장 솔루션 필요성 증가
-일회용 EPS 포장재 사용으로 인한 폐기물 발생 및 물류 비효율 문제 개선 필요
○ 반복 사용 환경에서 위생성·물류효율·작업 편의성을 고려한 물류 용기 개발
-일회용 EPS 포장재 대비 우수한 정온 유지 성능
-단일 소재 구조 적용을 통한 재활용성 및 자원 순환성 강화
-T11 파렛트 기준 표준 규격 적용으로 물류 효율 및 공동 활용성 향상
-반복 사용 기반 운영을 통한 포장 폐기물 저감 및 친환경 물류 구현
○ A mono-material reusable insulated logistics container to replace single-use EPS packaging
- Growing demand for reusable insulated packaging solutions with the expansion of the fresh food coldchain
logistics market
- Need to address waste generation and logistics inefficiencies caused by single-use EPS packaging
○ Development of a reusable logistics container for hygiene, logistics efficiency, and operational
convenience
- Superior temperature retention performance compared with single-use EPS packaging
- Mono-material structure enabling recyclability and resource circularity
- Standardized dimensions based on the T11 pallet for improved logistics efficiency and shared utilization
- Reduction of packaging waste and support for eco-friendly logistics through repeated-use operation
기술적특징 (Technical Features)
○ PP/EPP 단일 소재 기반 정온 구조 설계 적용
○ 단열 구조 최적화를 통한 우수한 정온 유지 성능 확보
○ 초박막(약 1T) 사출 구조 적용으로 제품 경량화 구현
-기존 기술 대비 약 30% 경량화
○ 방수 조립 구조 설계를 통한 단열 구조 내부 수분 유입 차단
○ 중첩(Nesting) 구조 적용으로 보관·회수 물류 효율성 확보
-보관·회수 물류 시 36%~50% 부피 절감
○ 일체형 커버 및 lock pin 구조 적용으로 포장 작업 효율 향상
○ PP/EPP mono-material structural design for insulated logistics containers
○ Optimized insulation structure providing excellent temperature retention performance
○ Ultra-thin injection molding structure (approx. 1 mm) for lightweight design
- Approximately 30% lighter than conventional designs
○ Water-resistant assembly structure preventing moisture ingress into the insulation structure
○ Nesting structure for storage and return efficiency
- 36?50% volume reduction during storage and return transport
○ Integrated cover and lock-pin structure for improved packaging efficiency